Marine Sensors

Compass Sensors

The Autonnic Compass Sensor uses fluxgate technology to provide the most accurate magnetic heading, meeting the requirements of all navigation displays and devices on board. The electronic compass unit is weather tight, allowing an optimal installation position inside or outside the hull.  The compass works by taking the magnetic heading and converting it into a digital signal for use by chart plotters, Autopilots, AIS systems and other electronic devices onboard.

In the A5040 gyro model, heading output is additionally derived by integrating the rate output from a MEMS yaw accelerometer or ‘gyro’ which is drift-corrected by a fluxgate magnetometer with pitch and roll compensation up to 45°.

  • Magnetic heading data

  • Pitch and roll compensated

  • Auto Calibration

  • 12/24V

  • Water resistant to IP68

  • 5 versions available

A5023 

NMEA-0183

A5024

NMEA-0183 with AD-10


A5040   

NMEA-0183  with gyro

A5050   

NMEA-2000 compatible

A5060  

NMEA-2000  compatible    with gyro

Compass Pick Up Sensor

The Autonnic Compass Pick Up Sensor takes the magnetic data generated by an existing yacht compass and converts it into NMEA0183 data to use for a variety of on-board purposes. The Pick Up Sensor avoids the need to install a standalone compass unit minimising cost and system complexity. Its roots are found in larger vessels where the ship’s compass is precisely calibrated and for certification purposes acts as the reference point for all navigation systems.

  • Attaches to ships compass

  • Mounting ring included with lock screw

  • Centre bolt for easy fixing

  • Magnetic heading data

  • Manual Calibration using PC

  • 12/24V

  • Calibration at 10 or 20 degree intervals

A4032  

NMEA-0183

IP68 Wind Sensors

The Autonnic Masthead Wind Sensor provides reliable and accurate information about the speed and direction of the wind working against a yacht. The unit is built to last using robust, quality materials and is able to withstand the harshest marine environments.

  • Wind speed and direction

  • Robust

  • 12/24V

  • Zero set-up feature

  • Available in 3 sizes: 

    • N    Normal for sailing cruising

    •     Extended for racing

    • P     A shorter version for Power boats

A5120 

NMEA-0183

A5130 

NMEA-2000 compatible

NMEA0183 to 2000 Wind Converter

Allows a NMEA0183 wind head sensor to be connected to a NMEA2000 system without requiring new mast wiring.  Provides power to the Masthead Sensor.

  • Takes in 0183 Wind data

  • Delivers NMEA-2000 Wind data

  • Can use existing masthead cable

  • Zero set-up button

Autonnic Research Ltd
Woodrolfe Road,
Tollesbury, Essex,
CM9 8SE
United Kingdom
info@autonnic.com
+44-162-186 9460
  • Facebook